Dredger launches for the first time Factory Suppliers Manufacturers Quotes


Home>News > Industry News
Industry News

Dredger launches for the first time

 The first time you purchase a dredger, you must fully review the hull before launching it into the water. In particular, with regard to some dredgers that need to be separated, you need to check whether there is water seepage in the hull and you need to check the components of the dredger. Whether the connection is tight and there are no missing fittings such as bolts and screws. When the dredger is in the water, it is also necessary to check the main floating body of the ship, the side floats, and whether there is water leakage in each compartment. It must be ensured that dredgers can be put into dredging operations without any problems.
  When the dredging vessel is carrying out dredging operations, if there is no designated construction orientation, the positioning piles must be erected first, and the positioning piles must also be found in the local area where the water depth is to be found. This is because the positioning piles can be satisfied only in the local area in deep water. Erection requirements. Then start the generator set, and then start the hydraulic system emergency hydraulic pump, so that the hydraulic system can operate normally, and then is to release the left and right traverse cable, from the front of the traverse pulley back under the hull Position the pile root and secure it.

Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
* Subject :
* Email :
  • Name :

  • Phone:

  • *Message :