Starting dredger engine preparation Factory Suppliers Manufacturers Quotes


Home>News > Industry News
Industry News

Starting dredger engine preparation

Starting dredger engine preparation

 First check the circulating water level in the engine, check the oil level of the hydraulic oil tank and turn on the total valve of the oil outlet of the hydraulic oil tank, and check the engine, gear box, sand pump, bearing box and oil level. Then open the bottom valve of the external circulating water system and adjust all the valves to the operating conditions. Finally, go to the operation room to check whether the 24V power supply on the operation cabinet is disconnected (when the button on the operation cabinet is not used, the 24V power supply should be disconnected). Switch, button all reset, to ensure that everything is normal. To the dredger cabin below, close the 24v power supply, launch the knife, turn up the development of the monitor.

Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
* Subject :
* Email :
  • Name :

  • Phone:

  • *Message :