Tips for using dredger positioning piles Factory Suppliers Manufacturers Quotes


Home>News > Industry News
Industry News

Tips for using dredger positioning piles

Tips for using dredger positioning piles

 Cutter suction dredger positioning pile notes
1) Check the hydraulic and electrical systems carefully before use to ensure that there is no leakage or no looseness of the circuit.
2) Check the reversing organization to ensure that the orientation is outstanding before lifting the work.
3) When it is not used for a long time, it should be run 1-3 times before it can be loaded.
4) The center of gravity of the load should be at the center behind the workbench.
5) During the reproduction operation, all personnel are prohibited from operating alongside the high pressure pipeline.
6) The hydraulic fluid should be kept clean and must not be mixed with other impurities.
7) When the malfunction is not working properly, the power source should be plugged and repaired in a timely manner. Equipment personnel should be prohibited from sick work: Non-professionals should not disassemble the hydraulic components and electrical equipment.
8) If there is inconsistency in lift during operation, several operations should be performed to eliminate accumulated errors after no-load operation.
9) Add a dust cover when not in use.

Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
* Subject :
* Email :
  • Name :

  • Phone:

  • *Message :